Robust TUFF-DOR

Are your premises protected from attack by determined intruders? Do you need a ROBUST solution to security?


The Robust TUFF-DOR is a fully certified LPS 1175 security doorset designed to offer
an enhanced level of security for a wide range of premises, from domestic or light commercial premises
through to those at high risk of attack by experienced intruders.

LPS1175

Introducing the Robust TUFF-DOR: a strong, secure & durable LPS 1175 certified doorset

ROBUST TUFF-DOR LPS 1175 certified security doors are designed to offer an enhanced level of security for premises requiring a higher level of protection than that offered by a basic steel hinged doorset. The doors are specially constructed to individual project requirements and each door has internal reinforcement designed to resist sustained attack from a wide range of tools.

With a broad range of high end hardware systems on offer, our doors are available in both single and double configurations up to 2500mm x 2600mm*. Our TUFF-DOR doors are available as locking or escape versions and a limited range of vision panel options are also available.
(*some restrictions may apply)

TUFF-DOR

LPS 1175 Security Ratings
LPS1175

LPS 1175 SR2

SR2

Products certified to LPS 1175 SR2 standard provide up to 3 minutes of resistance to opportunist attempts at forced entry of protected premises using a range of mechanical tools, including: screwdriver, levers, spanner, bolt cutters, claw hammer, drill, shears, etc.

LPS 1175 SR3

SR3

Products certified to LPS 1175 SR3 standard provide up to 5 minutes of resistance to determined attempts at forced entry of protected premises using a wide range of tools, including: cordless tools, short axe, cold chisels, crow bar, brick bolsters, gas torch, etc.

LPS 1175 SR4

SR4

Products certified to LPS 1175 SR4 standard provide up to 10 minutes of resistance to experienced attempts at forced entry using a wide range of tools, including: high powered cordless tools, felling axe, sledgehammer, power drill, disc grinder, jigsaw, etc.

Loss Certification Protection Board LPS 1175 Standard

The ability to provide LPS 1175 certification demonstrates that a doorset has been rigorously tested and has proven its
ability to withstand attack by determined intruders using a variety of tools. All Robust TUFF-DOR products are fully LPS 1175 certified.

The LPS 1175 Standard

Robust LPS 1175 (Loss Certification Protection Board: Loss Prevention Standard) doorsets are designed to provide increased security against attempted force entry over standard doors in applications ranging from domestic apartments through to high value storage areas. These doors can be fitted with a wide variety of hardware including panic bars and locking boxes.

The differing security ratings provide protection from attack over periods from 1 minute up to 20 minutes of sustained attack. The choice is determined by the anticipated level of attack, whether from determined opportunist attempts using hand tools through to professional attempts at forced entry, regardless of noise, using heavy hand and power tools or explosives.

In order to obtain LPS 1175 certification, products must undertake a series of manual intervention attack tests using tools from the tool category appropriate to the product's anticipated security rating. All aspects of the product (hardware, glazing, infill, etc.) are treated as an integral part of the product and are attack tested accordingly. All aspects of the product must therefore provide the minimum resistance to attack defined for the anticipated security rating.

TUFF-DOR Certification

Our TUFF-DOR2 is tested to LPS 1175 SR2 standard and has successfully defeated attack by assailants with a range of mechanical tools available to potential attackers. This level is commonly used for domestic properties and light commercial security.

Our TUFF-DOR3 is tested to LPS 1175 SR3 standard and has successfully defeated attack by assailants with a range of power tools available to potential attackers. This level is suitable for commercial premises or locations where the chance of attack is enhanced and likely to be more sustained.

Our TUFF-DOR4 is tested to LPS 1175 SR4 standard and has successfully defeated attack by assailants with a range of power tools and explosives available to potential attackers. This level is suitable for commercial premises or locations at high risk of attack by determined intruders.

Tuff-Vent
Tuff-Vent Front Tuff-Vent Rear

Robust TUFF-VENT is a strong, secure & durable fully louvred doorset

To complement our range of LPS 1175 doors, our TUFF-VENT doorset offers the maximum free airflow whilst maintaining strength and security. A standard 2mm galvanised steel louvre vane is used throughout, welded at every junction for additional strength. Side panels and overpanels can also be manufactured to make up large openings where large doors may be impractical.

When calculated on a 1000mm x 2100mm over frame door, the Robust TUFF-VENT achieves a free area of 55% (based on the area of the louvres only, this equates to 72%). Robust TUFF-VENT doors are fully CE compliant and can be polyester powder coated in a standard range of colours.
Please note our TUFF-VENT doors are not available certified to LPS1175

Want to find out more?

If you have an questions about Robust TUFF-DOR please contact our sales office on 01782 592900.